العودة إلى المدونة
أدلة الشراء 2026-11-21 DeatschWerks 10 مشاهدة

AN Fitting Sizes: Which One Do You Need?

AN Fitting Sizes: Which One Do You Need?

Choose the right AN fitting size for your fuel system. Compare 6AN and 8AN options, learn about hose end olives and quick connects.

Choosing Between 6AN and 8AN Fittings

When plumbing a fuel system, the first decision is often the AN fitting size. 6AN and 8AN are the most common sizes, and the right choice depends on your fuel flow requirements and the components you're connecting. 6AN fittings handle up to about 600 hp in many applications, while 8AN supports higher flow rates—typically over 800 hp—making it a better fit for high-performance or racing builds.

Your fuel pump, injectors, and regulator will usually dictate the line size. If your system uses a 6AN hose, stick with 6AN fittings throughout. Mixing sizes without proper reducers can create leaks or restrict flow.

6AN Fitting Options from DeatschWerks

  • 6AN PTFE Hose End Olive (Pack Of 10): The DeatschWerks 6AN PTFE Hose End Olive is a replacement insert for 6AN PTFE hose end fittings. This pack includes 10 olives. When building or repairing 6AN PTFE hose assemblies, these olives are the correct sealing component. Having a pack of 10 means you can complete multiple connections or keep spares on hand without ordering singles.
    6AN PTFE Hose End Olive (Pack Of 10)
    6AN PTFE Hose End Olive (Pack Of 10)
  • 6AN to Module Quick Connect: The DeatschWerks 6AN to Module Quick Connect adapts a 6AN male flare to a Toyota module quick connect. It has an anodized DW Titanium finish. If your fuel system uses a Toyota-based module (common in many performance EFI setups), this adapter lets you connect a standard 6AN line without custom fabrication. The anodized finish resists corrosion in the engine bay.
    6AN to Module Quick Connect
    6AN to Module Quick Connect
  • 6AN Hose Rubber Cushioned P-Clamp: The DeatschWerks 6AN Hose Rubber Cushioned P-Clamp secures 6AN hose with a 9.5mm clamp ID and a rubber cushion that protects the hose surface. Proper hose routing prevents chafing and vibration damage. This clamp keeps your 6AN line securely mounted while the rubber insert prevents abrasion, extending hose life.

When to Use 8AN Fittings

8AN fittings are wider and allow higher fuel volume, which is essential for engines demanding more than 600 hp or running high-pressure systems. The DeatschWerks 8AN ORB to 1/2 in Barb fitting connects an 8AN ORB male end to a 1/2 inch male triple barb. This is useful when adapting an 8AN hardline or hose to a barbed fitting on a fuel pump or filter. The included O-ring simplifies sealing.

Keep in mind that 8AN components are physically larger and less flexible than 6AN. Plan your routing to avoid tight bends that could kink the hose.

8AN Adapter Details

  • 8AN ORB to 1/2 in Barb: This DeatschWerks fitting connects an 8AN ORB male end to a 1/2 inch male triple barb. It is finished in anodized matte black and includes an O-ring. When your system uses 8AN line but a component (like a pump or filter) has a 1/2 inch barb, this adapter bridges the connection cleanly. The O-ring eliminates the need for thread sealant.

Practical Selection Tips

Start by checking your fuel pump outlet size and injector rail inlet. Most aftermarket EFI systems specify a recommended AN size in the manual. If you're building from scratch, 6AN is sufficient for most street applications up to 600 hp. For dedicated race cars or builds with high-flow pumps, step up to 8AN.

Always match the hose ID to the fitting size. A 6AN fitting requires 6AN hose; an 8AN fitting requires 8AN hose. Using mismatched sizes will cause leaks or burst lines. Finally, use cushioned clamps like the 6AN P-Clamp to secure your lines and prevent chafing.

مقالات ذات صلة

Customer Service
الرئيسية
المنتجات
السلة
الملف الشخصي