EV14 to Delphi Wired Connector Adapter

Had to swap my fuel injectors last weekend and this adapter made the wiring conversion dead simple. The connector locks in with a reassuring click, and the wires are thick enough to handle the current without worry.

The pins seated firmly into both the injector and the harness side with zero slop, and the wiring length gave me just enough room to reroute cleanly. Took about ten minutes to swap everything over and the engine fired right up.

Swapped my old Delphi injectors for EV14s and these adapters clicked right in on the first try, no splicing or repinning needed. The wired pigtails are long enough to reach the factory harness without stretching. Idle smoothed right out once everything was connected.