What the Numbers Actually Mean
AN fitting sizes are based on the outer diameter of the tubing in sixteenths of an inch. A 6AN fitting fits 3/8" tubing (6/16"), while 8AN fits 1/2" tubing (8/16"). This standard makes it easy to match fittings to hard line or hose sizes, but the real choice comes down to flow demand and space constraints in your fuel system.
When 6AN Makes Sense
For naturally aspirated engines making up to about 500-600 hp, 6AN lines are usually sufficient. They're lighter, more flexible, and easier to route in tight engine bays. Many stock-replacement fuel pumps and regulators use -6AN ports, so 6AN fittings keep the system simple. If your build doesn't require high-volume fuel delivery, 6AN is often the practical choice.
When 8AN Is the Better Call
Once you cross into forced induction or high-horsepower territory, 8AN fittings provide the extra flow capacity needed to keep up with larger injectors and higher fuel pressure. The larger bore reduces restriction, which can help maintain stable pressure at high demand. 8AN is also common on return lines for systems that need to bypass a lot of fuel back to the tank.
8AN Couplers and Adapters from DeatschWerks
- 45-Deg. 8AN to 8AN Swivel Coupler: 45-degree swivel coupler connects 8AN flare female swivel to 8AN flare female swivel, anodized DW Titanium finish. Use this coupler to join two 8AN lines at a 45° angle, useful for routing around obstacles in tight engine bays.

45-Deg. 8AN to 8AN Swivel Coupler - 8AN ORB to 8AN Coupler: 8AN ORB to 8AN Coupler connects 8AN ORB male swivel to 8AN male flare in a 90-degree configuration, anodized matte black. This fitting adapts an O-ring boss port (common on pumps and regulators) to an 8AN flare line, saving space with a 90° bend.

8AN ORB to 8AN Coupler - 8AN ORB to M14 X 1.5 Metric Adapter: 8AN ORB to M14 X 1.5 Metric Adapter includes O-ring and crush washer, anodized DW Titanium finish. When your engine or component has a metric M14 port, this adapter bridges to an 8AN ORB connection without custom machining.
Myth: Bigger Is Always Better
It's tempting to run 8AN everywhere for 'future-proofing,' but oversizing can create problems. Larger lines are stiffer, harder to route, and can trap air pockets that make priming difficult. A 6AN line that's properly sized for your flow needs will perform just as reliably as an 8AN line that's oversized. Match the fitting to the actual flow requirement of your fuel system.
What the Catalog Does Not Settle
The supplied product records confirm the size, configuration, and finish of each fitting, but they don't specify flow rates, pressure ratings, or compatibility with every hose brand. For exact flow data, consult your fuel pump and injector specifications. Always verify that the thread type and seat style match your existing hardware before ordering.




