What the catalog confirms before you order
- DW65A Install kit for VT/VX/VY/VZ Holden Commodore: Compatible with the DeatschWerks DW65A fuel pump. The kit is built around one specific pump, so it is not a universal hardware set for any in-tank pump.

DW65A Install kit for VT/VX/VY/VZ Holden Commodore - DW65A Install kit for VT/VX/VY/VZ Holden Commodore: Fits Holden Commodore VT, VX, VY, and VZ models with Gen III 5.7L or 6.0L V8 engines from 1997–2006. This is the fitment boundary: the engine family and model range are listed, not every Commodore of those years.
- DW65A Install kit for VT/VX/VY/VZ Holden Commodore: A complete fuel pump installation kit that includes the necessary hardware for a straightforward swap. It tells you the kit is intended to supply the install hardware, so you can plan around it rather than assuming a bare pump.
DW65A kit fitment questions
- Will this DW65A install kit fit my VT/VX/VY/VZ Commodore?
- Only if your car is a VT, VX, VY, or VZ with the Gen III 5.7L or 6.0L V8 from 1997–2006. The catalog lists those models and engines specifically. It does not list V6 or other engine variants, so check your engine code before ordering rather than relying on the body shape alone.
- Does the kit fit any fuel pump, or only the DW65A?
- The catalog states compatibility with the DeatschWerks DW65A fuel pump. Treat it as a pump-specific kit, not a generic install hardware pack for whatever pump you happen to have.
- What is actually in the box?
- The catalog describes it as a complete fuel pump installation kit that includes the necessary hardware for a straightforward swap. It does not itemize individual pieces, so if you need to confirm a specific clip, seal, or connector, check with the seller before you order.
- Is this the same as a Commodore fuel pump upgrade kit?
- It is the install side of a DW65A swap, not the pump itself. If you are planning a full upgrade, you need the DW65A pump plus this kit; the kit alone does not replace a worn pump.
- Does the catalog confirm wiring, hose, or electrical details?
- No. The supplied information covers the pump compatibility, the Commodore model and engine range, and that the kit includes the necessary installation hardware. It does not confirm wiring, hose type, or electrical connectors, so verify those against your car and the pump before starting.
- Why is the price so low compared with the comparison price?
- The catalog lists USD 11.10 against a comparison price of USD 15.00. That is a hardware kit price, not a pump price, so budget for the DW65A pump separately if you do not already have one.
What to check on your Commodore before ordering
Open the bonnet and confirm the engine, not just the badge. The kit is listed for Gen III 5.7L and 6.0L V8 VT–VZ cars from 1997–2006, so a V6 or a later engine family falls outside the catalog description. If your car has had an engine swap, the model year alone will not tell you whether this kit applies.
Then confirm you are fitting a DW65A. The kit is tied to that pump in the catalog, and the hardware is described as what you need for a straightforward swap. If you are still choosing a pump, settle that first; if you already have the DW65A, this kit is the matching install hardware.
Finally, treat the catalog as a starting checklist rather than a full workshop manual. It confirms fitment and that installation hardware is included, but it does not spell out a step-by-step procedure or list every individual component. If you need that level of detail, ask the seller or consult the pump documentation before you begin.


