Confirm your chassis and engine before you plan the conversion
An SR20 top feed fuel rail conversion starts with one question: does the rail belong to your car? The DeatschWerks Nissan SR20 S13 Top Feed Conversion Fuel Rail is a vehicle-specific kit, not a universal rail. The catalog lists it for the Nissan SR20 engine in the S13 chassis, with applications covering 1991-97 Nissan 180SX, 1991-93 Nissan Silvia, and 1989-93 Nissan 240SX.
That means your first checkpoint is the combination of engine and chassis, not the model year alone. If your car is an S13 with an SR20 and it falls within those listed applications, this rail is the intended starting point. If your car is an S13 with a different engine, or an SR20 in a different chassis, the catalog does not support the fitment.
What the catalog confirms about the 7-800 rail
- Nissan SR20 S13 Top Feed Conversion Fuel Rail: DeatschWerks Nissan SR20 S13 Top Feed Conversion Fuel Rail, SKU 7-800, category Fuel Injection Fuel Rail. The SKU and product type let you match the part to your build before ordering.

Nissan SR20 S13 Top Feed Conversion Fuel Rail - Nissan SR20 S13 Top Feed Conversion Fuel Rail: Vehicle-specific fuel rail kit for the Nissan SR20 engine in the S13 chassis. This is the core fitment statement. It tells you the rail is designed around a specific engine and chassis, so universal-fuel-rail assumptions do not apply.
- Nissan SR20 S13 Top Feed Conversion Fuel Rail: Intended for 1991-97 Nissan 180SX, 1991-93 Nissan Silvia, and 1989-93 Nissan 240SX applications. Use these three application ranges to check your own car before you commit to the conversion.
- Nissan SR20 S13 Top Feed Conversion Fuel Rail: Top feed conversion design. The rail is built to convert the SR20 to top feed. The catalog does not list the injectors, fittings or other conversion parts, so treat those as separate decisions.
A pre-order check for your S13 SR20 build
The catalog gives you fitment boundaries, not a full installation procedure. Use these checks to decide whether the rail is the right part before you buy.
- Identify your chassis and engine: Confirm you have an S13 chassis with an SR20 engine. The rail is listed for the SR20 in the S13, so a different engine or chassis falls outside the catalog evidence.
- Match your model to the listed applications: Check your car against 1991-97 Nissan 180SX, 1991-93 Nissan Silvia, or 1989-93 Nissan 240SX. If your car is outside those ranges, the catalog does not confirm fitment.
- Plan the top feed conversion as a system: The rail is the top feed conversion component. The catalog does not list injectors, fuel lines, fittings or a pressure regulator as part of this kit, so source and verify those separately for your build.
- Check the rest of your fuel system: The catalog does not supply fuel pump, filter or tuning requirements. Those remain your responsibility to verify against your engine management and power goals.
What the catalog does not settle about the install
The supplied product record does not include torque specifications, injector sizing, fuel line routing, or a step-by-step installation sequence. That absence is a limit of the supplied evidence, not proof that no instructions exist. Do not treat general fuel-rail advice as a manufacturer procedure for this part.
Before you start, confirm the supporting parts and any installation guidance through the manufacturer or a qualified tuner. The rail is vehicle-specific, but the conversion around it is not fully described in the catalog, so plan the job as a system rather than a single bolt-on.
Price context and the honest trade-off
The catalog price is USD 144.54, with a comparison price of USD 219.00. That is the cost of the rail kit itself. Because the catalog does not list the injectors, fittings or other conversion parts, budget for those separately rather than assuming the rail price covers the whole top feed conversion.
The trade-off is specificity: this rail is designed for the SR20 in the S13, which is useful when your car matches the listed applications. If your car falls outside those applications, the catalog does not support the fitment, and a different path is the safer choice.


