What to Know Before Choosing a 6AN Fuel Hose Material
When you're building or upgrading a fuel system, the hose material affects how the line handles pressure, heat, and fuel types. DeatschWerks offers two 6AN nylon braided hoses in 10-foot lengths: a CPE (chlorinated polyethylene) hose and a PTFE (polytetrafluoroethylene) hose. Both share a similar braided nylon outer layer, but the inner tube material makes a practical difference in where each hose fits best.
This comparison focuses on the two products available from DeatschWerks: the 10 ft, 6AN Nylon Braided CPE Hose (SKU 6-02-0815-10) and the 10 ft, 6AN Black Nylon Braided PTFE Hose (SKU 6-02-0864-10). The goal is to help you decide which one matches your fuel system requirements, not to declare a universal winner.
What the Catalog Confirms About Each Hose
- 10 ft, 6AN Nylon Braided CPE Hose: DeatschWerks 10 ft, 6AN Nylon Braided CPE Hose has a black nylon braided CPE construction. Size: 6AN. Length: 10 feet. CPE is a rubber-like material that resists fuel, oil, and ozone, and is flexible enough for routing in tight engine bays.

10 ft, 6AN Nylon Braided CPE Hose - 10 ft, 6AN Black Nylon Braided PTFE Hose: DeatschWerks 10 ft, 6AN Black Nylon Braided PTFE Hose has a black nylon braided PTFE construction. Size: 6AN. Length: 10 feet. PTFE (often called Teflon) has a smooth inner bore that reduces fuel permeation and handles a wider range of fuels, including ethanol blends, with minimal chemical reaction.

10 ft, 6AN Black Nylon Braided PTFE Hose
CPE vs PTFE: Key Differences at a Glance
Both hoses are 6AN, 10 feet long, and use a black nylon braided outer layer. The difference is the inner tube material, which affects flexibility, fuel compatibility, and cost.
- Inner Tube Material: CPE (chlorinated polyethylene) vs PTFE (polytetrafluoroethylene). CPE is a synthetic rubber; PTFE is a fluoropolymer.
- Flexibility: CPE is generally more flexible than PTFE, making it easier to route in tight spaces without kinking. PTFE is stiffer and may require careful bending or pre-forming.
- Fuel Compatibility: PTFE is nearly impermeable and resists virtually all fuels, including high-ethanol blends (E85) and methanol. CPE is compatible with common gasoline and diesel but may not be recommended for aggressive alcohol-based fuels.
- Price (Catalog): The CPE hose is listed at USD 51.20 (catalog comparison price USD 80.00). The PTFE hose is listed at USD 68.20 (catalog comparison price USD 110.00). PTFE carries a premium.
When to Choose the CPE Hose
The 6AN Nylon Braided CPE Hose is a solid choice for standard gasoline or diesel fuel systems where flexibility and lower cost are priorities. Its rubber-like construction makes installation simpler in confined engine compartments, and the nylon braid adds abrasion resistance. If your build uses pump gas and you don't need the extreme chemical resistance of PTFE, the CPE option saves money without sacrificing durability for typical street applications.
When the PTFE Hose Makes More Sense
The 6AN Black Nylon Braided PTFE Hose is better suited for high-performance or alternative-fuel builds. Its PTFE inner liner minimizes fuel permeation, which helps maintain consistent fuel pressure and reduces fuel smell in the engine bay. It also handles ethanol blends, methanol, and other aggressive fuels that can degrade rubber hoses over time. The trade-off is higher cost and reduced flexibility, so you may need to plan your routing more carefully.
What the Catalog Does Not Settle
The supplied catalog records do not include specific pressure ratings, temperature ranges, or bend radius limits for either hose. If your fuel system operates at extreme pressures or temperatures, or if you need precise routing dimensions, verify those specifications directly with DeatschWerks or your system designer. Also, the catalog does not confirm whether either hose comes with pre-installed fittings or requires separate AN fittings—plan your purchase accordingly.



