DeatschWerks

DW200/300 後期C4 Corvette安裝套件

DW200/300 後期C4 Corvette安裝套件 - Main image
$13.87 $19 In stock

Category: 燃油泵完整套組

DW200/300 安裝套件提供所有必要組件,用於將 DeatschWerks DW200 或 DW300 燃油泵安裝在配備 5.7 L 引擎的後期型 C4 Corvette(1990-1996)上。此套件專為簡便的螺栓固定更換而設計,不適用於 ZR-1 車型。

  • 相容於配備 5.7 L 引擎的 C4 Corvette 1990-1996(不含 ZR-1),適用於 DW200 或 DW300 燃油泵。
  • 包含所有必要的硬體和支架,可完成完整安裝。
  • 專為直接螺栓固定設計,可減少安裝時間。
  • 由 DeatschWerks 製造,該品牌在高性能燃油系統組件領域值得信賴。
付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (5.0 / 5 · 5 reviews)

Benjamin ★★★★★

Putting this kit together took maybe twenty minutes, and every bracket and O-ring lined up perfectly with the stock fuel pump mount. The included wiring harness connectors made the swap clean, and my late C4 fired right up without a single hiccup.

Ryan A. ★★★★★

Finally a kit that includes the proper J-hook fittings and o-rings right in the box, so no last-minute trips to the hardware store. The filter included fits perfectly in the stock location on my 1995 Corvette. Installation was clean and straightforward with everything supplied.

Carter ★★★★★

The supplied hardware lined up perfectly with my '93 C4’s factory mounting points, saving me from any bracket fabrication. The viton o-rings and PTFE tape in the kit gave me confidence the connections won't leak under pressure. Installation took about two hours with basic hand tools, and the engine