Start with your engine code, not the flow number
If you are shopping for 850cc Subaru STI injectors, the first question is not how much fuel you need. It is whether the injector is built for your exact EJ25 application. The DeatschWerks 850cc side feed set is vehicle-specific, and the catalog lists three distinct fitments: Subaru STI EJ25 (2004–2006), Legacy GT EJ25 (2004–2006), and Impreza 2.5 RS (1997–1998). Those are different cars with different intake and fuel hardware, so confirming your model and year is the real starting point for EJ25 850cc injector fitment.
This guide walks through what the catalog confirms, where the information stops, and how to decide whether this matched set of four is the right purchase for your build.
What the catalog confirms about this injector set
- 850cc - Subaru STI/GT EJ25, Impreza 2.5 RS: Matched set of four 850cc side feed fuel injectors. A matched set of four is a direct fit for four-cylinder EJ25 engines, so you are not mixing flow rates across cylinders.

850cc - Subaru STI/GT EJ25, Impreza 2.5 RS - 850cc - Subaru STI/GT EJ25, Impreza 2.5 RS: Compatible with Subaru STI EJ25 (2004–2006) and Legacy GT EJ25 (2004–2006). These are the two turbocharged EJ25 applications the catalog explicitly supports for this set.
- 850cc - Subaru STI/GT EJ25, Impreza 2.5 RS: Also fits Subaru Impreza 2.5 RS (1997–1998). The same part number covers an older naturally aspirated application, so year and model checking matters.
- 850cc - Subaru STI/GT EJ25, Impreza 2.5 RS: Vehicle-specific design from DeatschWerks for reliable performance. The catalog presents this as a direct replacement upgrade for select EJ25 models, not a universal injector.
Where the sizing question actually gets answered
The catalog gives you the flow rating (850cc) and the vehicle fitments, but it does not supply a duty cycle target, fuel pressure assumption, or horsepower ceiling. That means this page cannot tell you whether 850cc is the correct size for your specific turbo, fuel, and tuning setup. Those calculations depend on your target power, fuel type, and the rest of your fuel system, and they belong with your tuner or a dedicated Subaru injector sizing guide.
What the catalog does let you do is rule this set in or out on fitment. If your car is a 2004–2006 STI or Legacy GT with the EJ25, or a 1997–1998 Impreza 2.5 RS, this is a listed application. If it is not one of those, the catalog does not confirm fitment, and you should not assume it works because the engine family is similar.
The three listed applications at a glance
The same 850cc side feed set is listed for three different EJ25 vehicles. Use this to check your own car before ordering.
- Subaru STI EJ25 (2004–2006): Listed as compatible. This is the turbocharged STI application most buyers search for when looking at 850cc Subaru STI injectors.
- Subaru Legacy GT EJ25 (2004–2006): Listed as compatible. If you are searching for Subaru GT EJ25 injectors, confirm your model year falls in this range.
- Subaru Impreza 2.5 RS (1997–1998): Listed as also fitting. This is a narrower year range than the turbo applications, so check the build year carefully if you are considering Impreza 2.5 RS 850cc injectors.
A fitment check before you buy
The catalog is specific about vehicles but silent on some details you may want before installation. Work through these points in order.
- Confirm your exact model and year: Match your car against the three listed applications: STI EJ25 2004–2006, Legacy GT EJ25 2004–2006, or Impreza 2.5 RS 1997–1998. If your car is outside those ranges, the catalog does not confirm fitment.
- Confirm side feed: The catalog describes these as side feed injectors. Your factory fuel system needs to be the side feed type for this set to be the right physical fit, and the catalog does not list alternate feed styles for this part.
- Plan for tuning: The catalog does not supply injector latency, dead time, or a tuning file. A flow change of this size normally requires ECU calibration, so budget for a tuner as part of the purchase rather than treating the injectors as a standalone bolt-on.
- Check the rest of the fuel system separately: The catalog does not state fuel pressure requirements, pump compatibility, or rail compatibility for this set. Those are separate decisions and should be confirmed against your build.
What the catalog does not settle
The supplied information does not include installation instructions, torque values, O-ring part numbers, or electrical connector details for this injector set. It also does not state whether the injectors are high or low impedance, so do not assume either. If those details matter for your harness or ECU, ask before ordering rather than inferring from the flow rating.
The catalog also lists a single variant, Standard, with no alternate options. That keeps the decision simple: the choice is whether this vehicle-specific set fits your car, not which version to pick.
Price context and the honest tradeoff
The catalog price for this matched set of four is USD 461.61, shown against a comparison price of USD 669.00. That is the price for a vehicle-specific, matched set of four side feed injectors, not a universal injector you adapt to fit.
The tradeoff is straightforward. You get a set the catalog explicitly lists for three EJ25 applications, which reduces fitment guesswork. What you give up is flexibility: if your car is not one of those three, this set is not the confirmed answer, and the catalog does not provide the sizing data to justify buying it anyway. For a 2004–2006 STI or Legacy GT, or a 1997–1998 Impreza 2.5 RS, the fitment question is settled by the catalog. The sizing question still belongs with your tuner.


