The fitment window is the first thing to check
Before you compare hose sizes or think about your fuel system goals, confirm your car falls inside the years this kit was built for. The DeatschWerks X2 Series Pump Module -8AN feed with -6AN return PTFE Plumbing Kit is listed for the 2012-2016 Scion FR-S, the 2012-2020 Subaru BRZ, and the 2017-2020 Toyota 86.
That means the kit is not a universal hose set. It is a vehicle-specific plumbing package tied to the X2 Series Pump Module for those platforms. If your car is outside those windows, this is not the right starting point.
What the catalog confirms
- X2 Series Pump Module PTFE Plumbing Kit for 12-16 FR-S, 12-20 BRZ, 2017-20 86: X2 Series Pump Module -8AN feed with -6AN return PTFE Plumbing Kit for 2012-16 Scion FR-S, 2012-20 Subaru BRZ, 2017-20 Toyota 86 This is the exact application list you should match against your model year before ordering.

X2 Series Pump Module PTFE Plumbing Kit for 12-16 FR-S, 12-20 BRZ, 2017-20 86
What -8AN feed and -6AN return tell you
The kit uses a -8AN feed line and a -6AN return line. In practical terms, the feed is the larger of the two lines, which is typical for a pump module plumbing setup where the feed carries fuel toward the engine and the return carries excess back to the tank. The catalog confirms those two sizes and the PTFE construction, but it does not list individual hose lengths, fitting angles, or the exact routing path for each chassis.
That gap matters when you are planning the job. You know the kit is built for the X2 Series Pump Module and the listed vehicles, but you should not assume every fitting, clip, or bracket is included unless the supplied information says so. The catalog does not confirm the full contents beyond the feed and return line sizes.
How to decide if this kit belongs in your build
Use these checks to separate a straightforward fit from a job that needs more research.
- Your car is a 2012-2016 FR-S: The kit is listed for this window. Confirm your model year and that you are working with the X2 Series Pump Module before ordering.
- Your car is a 2012-2020 BRZ: This is the widest listed window. The same -8AN feed and -6AN return plumbing applies, but the catalog does not break out year-by-year differences.
- Your car is a 2017-2020 Toyota 86: The 86 is listed separately from the FR-S and BRZ, so match the badge and year rather than assuming the FR-S window carries over.
- You are outside those years: The catalog does not list this kit for other model years. Do not treat it as a universal PTFE plumbing kit for the platform.
- You need confirmed contents beyond feed and return lines: The supplied information names the -8AN feed and -6AN return PTFE lines but does not itemize every component. Ask before assuming a complete bolt-on package.
Where the catalog stops
The catalog confirms the product type, the two line sizes, the PTFE material, and the vehicle application list. It does not supply installation steps, torque values, hose routing, or a confirmed list of included hardware. Those are real decision limits, not reasons to avoid the kit, but they mean you should verify the details that matter for your specific car before you commit.
If you are cross-shopping a BRZ fuel plumbing kit or a Toyota 86 fuel hose kit, the main thing this product offers is a matched feed-and-return set for the X2 Series Pump Module in the listed years. If your plan depends on a specific fitting count or a particular routing layout, that information is not confirmed in the supplied record and should be checked directly.
Price context from the catalog
- X2 Series Pump Module PTFE Plumbing Kit for 12-16 FR-S, 12-20 BRZ, 2017-20 86: Catalog price USD 511.36, with a catalog comparison price of USD 799.00 The listed price is part of the buying decision, but confirm current pricing and availability at checkout since catalog prices can change.


